Rule Rule-Mate® 2000 GPH Fully Automated Bilge Pump – 24V

53262
Rule

$397.99 $257.36

23 in stock
Qty :

Description

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump

The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2″ and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8″.

Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2″ and shutting off at 5/8″.

  • 2000 GPH (7570 LPH) at 0′ (27.2V)
  • All-in-one pump and switch
  • Extra long life heavy duty motor
  • 1″ NPS discharge with 1″ AND 1 1/8″ screw-on ports
  • Three year warranty

WarningWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Owner Manual

Volts = 24v | Outlet Size = NONE | Operation = Automatic | Gallons Per Minute = 33.3 GPM | Gallons Per Hour = 2000 GPH | Type = Electric

https://www.youtube.com/embed/FOmEYP6j0-w

Additional information

Weight 4.35 lbs
Dimensions 8 × 7 × 5 in
Model Number RM2000A-24
UPC 042237114303